Product | Rubber Conveyor Belt | ||
Model | EP 50 | ||
Material | Rubber+Polyester cotton canvas | ||
Thickness | 5mm--30mm | ||
Width | 250-3000mm | ||
Length | Customized | ||
Features | Remarkable transporting ability,high abrasion resistance,high tensile strength,impact resistant,waterproof, non-slip | ||
Application | General use,applied to gasket,andsalt, ore, sand, coal, mineral, chemical, power plant, metallurgy, stope etc. | ||
Model | Thickness | Tensile strength(MPa) | Elongation(%) | Abrasion loss(mm3) | Vertical Tensile strength(N/mm) | Cloth |
EP 50(polyeaster cotton canvas) | 10mm | 6 | 200 | 100 | 200 | 1800N/5cm |
Width(mm) | Layers(ply) | The thickness of coating rubber | |
Working face | Non-working face | ||
300 | 3~5 | 4.5 3.0 1.5 | 3.0 1.5 |
400 | 3~6 | 4.5 3.0 1.5 | 3.0 1.5 |
500 | 3~6 | 4.5 3.0 1.5 | 3.0 1.5 |
650 | 3~6 | 4.5 3.0 1.5 | 3.0 1.5 |
800 | 3~6 | 6.0 4.5 3.0 1.5 | 3.0 1.5 |
1000 | 3~8 | 6.0 4.5 3.0 1.5 | 4.5 3.0 1.5 |
1200 | 4~10 | 6.0 4.5 3.0 | 4.5 3.0 1.5 |
1400 | 4~10 | 6.0 4.5 3.0 | 4.5 3.0 1.5 |
1600 | 4~10 | 6.0 4.5 3.0 | 4.5 3.0 |
1800 | 5~10 | 6.0 4.5 | 4.5 3.0 |
160 200 250 315 400 500 630
Physical performance of the coating layer:
Performance Grade of the covering layer | Code | Tensile strength(≥Mpa) | Elongation rate at break(≥%) | Abrasion value(≤mm3) | Tensile strength and the change rate of elongation rate at break after the aging of 70ºC×7 days |
Designated crack-resistant | H | 24 | 450 | 120 | -25 to +25 |
Designated wear-resistant | D | 18 | 400 | 100 | -25 to +25 |
General | L | 15 | 350 | 200 | -25 to +25 |
Items | Between the coating layer and the core | ||
Among the layers(N/mm) | Thickness of the coating layer | Thickness of the coating layer | |
0.8--1.5mm | >1.5mm | ||
The average number of all specimens is no less than(≥N/mm) | 3.2 | 2.1 | 2.7 |
The minimum peak number of all specimens is no less than(≥N/mm) | 2.7 | 1.6 | 2.2 |
Package:Iron core+Woven bag
Or custom package according to your requirements.
